As of version 1.4, Asterisk comes packaged with a small web server called AJAM, which may be used to access the Asterisk Manager Interface (AMI) via HTTP. The name "AJAM" is derived from "AJAX" [ 41 ] (Asynchronous JavaScript and XML).
Set-up assumes the steps from
the section called “The Asterisk Manager Interface (AMI)”
have been carried out, plus some additional parameters. You must set
webenabled
to
yes
in the
[general]
section of
manager.conf
. Pay attention to
httptimeout
, which defines the inactivity timeout after which the user is automatically logged out of the web interface. To activate the web server, set these parameters in
http.conf
:
[general]
enabled=yes
enablestatic=yes
bindaddr=127.0.0.1
bindport=8088
prefix=asterisk
enablestatic
need only be activated if the AJAM will be serving static files from
/var/lib/asterisk/static-http/
. Normally you would set this to
no
, but it is needed for the purposes of the Asterisk-AJAM demo (
the section called “AJAM Demo”
).
Don't forget to restart!
|
Our assessment is that it almost never makes sense to serve other web applications (that is, those intended strictly for administrator access) through the AJAM interface. It is also doubtful that it was intended to, because the rights assignments through
|
Again, we are solving the problem addressed in the section called “Example: Getting the number of voicemail messages with expect” and the section called “Example: Getting the number of mailbox messages with PHP” : we want to find out the number of messages in a specified mailbox. The AJAM offers us a few ways to do this:
The AMI waits for queries at
http://localhost:8088/asterisk/manager
. Packet fields are tacked on the end of the URL. Try these addresses in your web browser:
http://localhost:8088/asterisk/manager?action=Login&username=admin&secret=secret5
http://localhost:8088/asterisk/manager?action=MailboxCount&mailbox=123
The response follows in the form of an HTML page, so it's not really suitable for access via a script.
If we replace
manager
in the URL with
rawman
, we get plain text output. To log in and get a message count from the mailbox, then:
http://localhost:8088/asterisk/rawman?action=Login&username=admin&secret=secret5
Response: Success
Message: Authentication accepted
http://localhost:8088/asterisk/rawman?action=MailboxCount&mailbox=123
Response: Success
Message: Mailbox Message Count
Mailbox: 123
NewMessages: 0
OldMessages: 0
http://localhost:8088/asterisk/rawman?action=Logoff
Response: Goodbye
Message: Thanks for all the fish.
This text output is more script-friendly.
If we want XML instead, we call
mxml
instead. The XML output is presented formatted for better readability. In practice, AJAM does not put line breaks inside the XML tags. Either way, a compliant XML parser won't care.
http://localhost:8088/asterisk/mxml?action=Login&username=admin&secret=secret5
<ajax-response>
<response type='object' id='unknown'>
<generic
response='Success'
message='Authentication accepted' />
</response>
</ajax-response>
http://localhost:8088/asterisk/mxml?action=MailboxCount&mailbox=123
<ajax-response>
<response type='object' id='unknown'>
<generic
response='Success'
message='Mailbox Message Count'
mailbox='123'
newmessages='0'
oldmessages='0' />
</response>
</ajax-response>
http://localhost:8088/asterisk/mxml?action=Logoff
<ajax-response>
<response type='object' id='unknown'>
<generic
response='Goodbye'
message='Thanks for all the fish.' />
</response>
</ajax-response>
AJAX applications - as the name "Asynchronous JavaScript and XML" might suggest - use XML as the standard format, even though it is often criticized for its bloated structure. There are alternatives, such as JSON
[
42
]
, for example. JSON (JavaScript Object Notation) is - the name gives it away - well-suited for Javascript applications, because the data structure can be converted into an object natively and with little overhead using
eval()
. There are countless implementations for PHP, Perl, etc. but a JSON implementation for AJAM does not yet exist. One can, however, convert the plain-text output into JSON on the client side, if that turns out to be easier or if it's easily done using available Javascript libraries. Here's an example to get you thinking:
// We assume the received response and
// simulate it here:
var responseText = 'Response: Success/n'
+'Message: Mailbox Message Count/n'
+'Mailbox: 123/n'
+'NewMessages: 0/n'
+'OldMessages: 0/n';
// Escape single quotation marks:
responseText = responseText.replace( //'/g, "http://'" );
// Wrap fields in quotes:
responseText = responseText.replace( /^([a-z/d]*):/s*(.*)/gmi, "'$1':'$2
'," );
// Convert to object:
eval('var packet = {'+ responseText +'}');
// Now you can access the fields as you would with any object:
alert( packet['NewMessages'] ); // returns "0"
When accessing the AJAM with an AJAX application, the ping command is particularly useful for keeping authenticated connections alive.
http://localhost:8088/asterisk/rawman?action=Ping
Response: Pong
A small sample application demonstrating AJAX access may be run at
http://localhost:8088/asterisk/static/ajamdemo.html
. This uses the highly practical JavaScript library prototype
[
43
]
for AJAX access and displays, using the
Status
the currently active channels. You can use the AJAM demo as a basis for your own AJAX applications.
The Asterisk web server is a minimal implementation and cannot be seen as a wholesale replacement for a "proper" web server that can run PHP scripts or use modules, such as Apache. To unify a system that uses both, you can use Apache as a proxy for AJAM by adding
ProxyPass /ajam http://localhost:8088/asterisk
in the appropriate place in
httpd.conf
, so that all requests for
/ajam
are passed on to AJAM instead of being served by Apache.
更多文章、技術交流、商務合作、聯系博主
微信掃碼或搜索：z360901061
微信掃一掃加我為好友
QQ號聯系： 360901061
您的支持是博主寫作最大的動力，如果您喜歡我的文章，感覺我的文章對您有幫助，請用微信掃描下面二維碼支持博主2元、5元、10元、20元等您想捐的金額吧，狠狠點擊下面給點支持吧，站長非常感激您！手機微信長按不能支付解決辦法：請將微信支付二維碼保存到相冊，切換到微信，然后點擊微信右上角掃一掃功能，選擇支付二維碼完成支付。
【本文對您有幫助就好】元
